Toyota 1997 Celica Owner's Manual page 99

—Anti-theft system
(Type 2-2 and 3 only)
The anti-theft system prevents the audio
system from working after it has been dis-
connected. To activate the system, you
must set a three-digit security code. After
the system is set, "SEC" will appear in the
display each time the ignition is turned
from "LOCK" or "ACC" or "ON". Also, the
anti-theft light flashes every few seconds
while the ignition key is in the "LOCK"
position.
You will need to know your security code
to reactivate your radio after electrical ser-
vice is performed on your vehicle.
Choose a security code that is easy to re-
member and keep a copy of it (not in your
Toyota).
NOTICE
If you pushed any wrong buttons on
the anti-theft system, the following
messages will appear
display.
z "Err"—You have pushed wrong
buttons.
z "1-9"—Indicates the number of
errors you have made. You may
make up to nine errors, but no
more!
z "HELP"—The number of error you
can make was exceeded. The au-
dio sytem is completely inoper-
able. Contact you Toyota dealer.
94
Setting a security code for the first
time.
1. Turn off the audio system.
Turn ignition key to "ACC".
on the
Simultaneously push and hold in "1", "6",
and "PWR/VOL" until "SEC" appears on
the display.
2. While you are holding in the " " side of
"TUNE", push "1".
The display will read "- - -".
On some modes, "B" and "Y" will also
turn on.