Toyota 1998 Sienna Owner's Manual page 136

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "TUNE" or "SEEK"
button). Push and hold down the button
until you hear a beep⎯this will set the
station to the button. The button number
will appear on the display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and two
FM stations for each button (The display
will show "AM", "FM1" or "FM2" when you
push "AM·FM")
(Eject button)
Push the cassette tape eject button to
eject a cassette. Push the compact disc
eject button to eject a compact disc.
After you turn the ignition to "LOCK", you
will be able to eject a cassette or disc but
you will not be able to reinsert it.
136
(Reverse/Fast forward buttons)
Cassette Player
Push the fast forward button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the reverse button to
rewind a tape. "REW" will appear on the
display.
To stop the tape while it is fast forward-
ing, push the fast forward button or
"TAPE"; to stop the tape while it is re-
winding, push the reverse button
"TAPE".
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto−re-
verse feature.
Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
name. SIENNA (U)
AM F M
Push "AM F M" to switch be-
tween the AM and FM bands."AM", "FM1"
or "FM2" will appear on the display. These
systems allow you to set twelve FM sta-
tions, two for each button.
If the audio system is off, you can turn
on the radio
"AM F M". Also,
"AM F M" to switch from cas-
sette or compact disc operation to radio
or
operation.
AUDIO CONTROL / MODE
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
For low−pitch tone adjustment,
"AUDIO CONTROL / MODE" repeatedly
until "BAS" appears on the display. Then
turn the knob to suit your preference.
The display will show the range from
"BAS −5" to "BAS 5".
For middle−pitch tone adjustment, push
"AUDIO CONTROL / MODE" repeatedly
until "MId" appears on the display. Then
turn the knob to suit your preference.
The display will show the range
"MId −5" to "MId 5".
by pushing
push
push
from