If The Battery Is Discharged; Connecting The Jumper Cables - Toyota 2009 Camry Owner's Manual

Hide thumbs Also See for 2009 Camry:
Table of Contents

Advertisement

5-2. Steps to take in an emergency

If the battery is discharged

The following procedures may be used to start the engine if the vehi-
cle's battery is discharged.
You can call your Toyota dealer or qualified repair shop.
If you have a set of jumper (or booster) cables and a second vehi-
cle with a 12-volt battery, you can jump start your Toyota following
the steps below.
STEP
1

Connecting the jumper cables

If required, remove all vent plugs from the booster battery. Lay a
cloth over the open vents on the booster battery. (This helps
reduce the explosion hazard, personal injuries and burns.)
Positive (+) battery terminal on your vehicle
Positive (+) battery terminal on the second vehicle
Negative (-) battery terminal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown in
the illustration.
5
417

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents