Yamaha 2008 XVS1300AX Owner's Manual page 70

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Bolt
3. Disconnect the headlight coupler,
and then remove the bulb cover.
6
1. Headlight bulb cover
2. Headlight coupler
4. Unhook the headlight bulb holder,
and then remove the defective
bulb.
1. Headlight bulb holder
2. Headlight bulb
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
5. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
6-29
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
6. Install the headlight bulb cover,
and then connect the coupler.
7. Install the headlight unit by install-
ing the bolts.
8. Place the turn signal light bracket
cover in the original position, and
ECA10660 then install the bolts.