Handlebar Switches - Yamaha 2008 XVS1300AX Owner's Manual

3. Turn the key to "ON", and then re-
lease the "SELECT" switch after
five seconds or more.
4. Push the " " or " " side of the
"SELECT" switch to select the de-
sired brightness level.
5. Push the "RESET" switch to con-
firm the selected brightness level.
The display will return to the odom-
eter, tripmeter or clock mode.
INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
3-9
EAU12347 Right
1. Engine stop switch "
2. Hazard switch " "
3. "SELECT" switch "
4. "RESET" switch
5. Start switch " "
Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
3
/ "
/ "
EAU12350
"
EAU12400
/ "
" for the high
EAU12460
/ "
". When re-