Honda 2006 S2000 Owner's Manual page 72

Convertible Top
Convertible Top Cover
Use the convertible top cover when
the top is folded to help prevent
foreign objects, dirt, etc., from
getting into the material and the
mechanism.
The cover is attached to the body
with four snaps: two behind the roll
bars, and one on the side of each
seat. To install or remove the
convertible top cover correctly
this:
72
, do
1. Remove the convertible top cover
from the trunk, and lay it into
position behind the roll bar.
SNAPS
2. Hold the cover in place with its
snap on the driver's side of the roll
bar aligned with the pin on the roll
bar. Press on both sides of the
snap to attach it to the pin. Do not
push or pull the snap button when
installing the snap.
3. Align the snap on the passenger's
side of the roll bar with the pin.
Press on both sides of the snap to
attach it to the pin.
PIN
SNAP