Differential Fluid - Honda 2006 S2000 Owner's Manual

Differential Fluid

FILLER BOLT
CORRECT LEVEL
Check the fluid level with the
differential at normal operating
temperature and the vehicle sitting
on level ground. Remove the
differential fluid filler bolt and
washer, and carefully feel inside the
bolt hole with your finger. The fluid
level should be up to the edge of the
bolt hole. If it is not, slowly add fluid
until it starts to run out of the hole.
150
Use an SAE 90 viscosity hypoid gear
oil, API service classified GL5 or
GL6 only.
Put a new washer on the filler bolt,
then reinstall the filler bolt. Tighten
it securely. Tightening torque:
33 lbf·ft (45 N·m , 4.6 kgf·m)
The differential should be drained
and refilled with new fluid according
to the intervals shown on the
information display.
If you are not sure how to check and
add fluid, contact your dealer.