Table of Contents
Advertisement
Canadian Models
Select the attachment point you want
to use and remove the plug with a
small flat-tipped screwdriver or metal
fingernail file.
Install the anchor plate and
mounting hardware that came with
your car.
All Models
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
16 lbf . ft (22 N . m, 2.2 kgf . m)
If a torque wrench was not used, see
your Honda dealer as soon as
possible to verify proper installation.
Protecting Children
To attach a tether to a child seat,
follow the child seat maker's
instructions.
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.
Driver and Passenger Safety
Advertisement
Table of Contents
