Honda 1999 Accord Coupe Owner's Manual page 269

Changing a Flat Tire
JACK
7. Turn the jack's end bracket
counterclockwise to loosen it, then
remove the jack.
Taking Care of the Unexpected
WHEEL NUTS
WHEEL WRENCH
8. Loosen the four wheel nuts (4-
cylinder) or five (V-6) 1/2 turn
with the wheel wrench.
JACKING POINT
9. Find the jacking point nearest the
wheel you are removing. Place the
jack under the jacking point. Turn
the end bracket clockwise until
the top of the jack contacts the
jacking point. Make sure the
jacking point tab is resting in the
jack notch.