Toyota 2004 Matrix Owner's Manual page 150

To adjust all of the tone controls to the
middle position, push and hold
"AUDIO" knob for more than 2 seconds.
"FLAT" will appear on the display.
Sound balance adjustment function—
This knob is also used to adjust the
sound balance between the front and rear,
and the right and left speakers.
For front/rear adjustment, push
"AUDIO" knob repeatedly until
appears on the display. Then turn the
knob to adjust the front/rear balance.
For left/right adjustment, push
"AUDIO" knob repeatedly until
appears on the display. Then turn the
knob to adjust the left/right balance.
To return to the middle position balances,
push and hold the "AUDIO" knob for more
than 2 seconds.
Auto EQ (Automatic equalization)
Radio
This button is designed to select the pre-
set equalization (EQ) settings for tone.
The preset settings are designed for 6
program types (Classical, Pop,
Jazz, Talk, Country). Settings consist of
the bass, midrange and treble control
positions which can be stored into the
custom setting.
132
'04 MATRIX_U (L/O 0307)
To use a preset EQ setting: Push the
the "AUTO EQ" button until you reach the
setting you want. Every time you push
this button, the display toggles through the
six presets and custom setting in the fol-
lowing order; 1: Classical, 2: Pop, 3:
Rock, 4: Jazz, 5: Talk, 6: Country, 7: Cus-
tom.
To return to the manual mode (CUSTOM):
the
Push the "AUTO EQ"
"FAD"
"CUSTOM" appears on the display. Then
you can manually adjust
midrange, treble using the "AUDIO" knob.
the (See "AUDIO".) This will overwrite any
"BAL" previous custom setting that was saved
with a station preset.
When a tuner preset is saved, the current
EQ preset name is saved along with the
tuner setting. Additionally, the current EQ
setting is saved with the current mode
(AM, FM1, FM2 or CD).
Compact disc player
Push "AUTO EQ" to select the desired
preset equalization setting while playing a
CD. The equalization will be automatically
set whenever you play a CD.
Rock,
CD/AUX (Compact Disc/Auxiliary)
Push "CD/AUX" to switch from radio to
compact disc player operation. A disc
must already be loaded in the player.
When the audio is set into compact disc
operation, the display shows the track
number currently being played.
If the player or another unit equipped with
the player malfunctions, your audio system
button until
will display one of the six following error
messages.
the bass,
Error messages
If the player malfunctions, your audio sys-
tem will display the following error mes-
sages.
"CHECK CD":
D
The road is too rough. The disc should
play when the road is smoother.
D
The disc is dirty, scratched, wet or
upside down.
D
The air is very humid. If so, wait about
an hour and try again.
"PLAYER ERROR": There may be a mo-
tor problem in loading or unloading a disc
or communication problem in the player
unit.
2004 MATRIX from Oct. '03 Prod. (OM12861U)