Toyota 2004 Matrix Owner's Manual page 135

To turn off an interrupt while the radio in
on the PTY mode, select the program type
marked with an asterisk. Push and hold
"PROG TYPE" until you hear a beep. The
asterisk will disappear.
NOTE: ALERT! is a special program type
interrupt that is always on. If an emergen-
cy broadcast is received during reception
of anything other than AM broadcasting,
"ALERT" appears on the display and the
system adjust the volume to the interrupt
volume.
Setting a PTY station
Program types can be stored to the preset
buttons. For details, see "1 2 3 4 5 6
(Preset buttons)".
Seeking a PTY station
If the radio in on the PTY mode, it will
find and play the next station up or down
the station band within the same program
type. If no PTY station will be found,
"NOT FOUND" will appear on the display
and the radio will return to the previous
frequency.
For details, see "SEEK".
'04 MATRIX_U (L/O 0307)
Scanning a PTY station
If the radio in on the PTY mode, it will
tune in the next station within the same
program type.
For details, see "SCAN".
PWR/VOL (Power/Volume)
Push "PWR/VOL" to turn the audio system
on and off. Turn "PWR/VOL" to adjust the
volume.
RCL (Recall)
This button is designed to change the dis-
play in each mode.
You can also display the clock by pushing
this button when the ignition switch is off.
Radio
Push the "RCL" button to change the dis-
play among the frequency, program ser-
vice name and program type name when
RDS station is being received.
To change what is normally shown on the
display, push this button repeatedly until
you see the display you want, then hold
this button until the display flashes and
you hear a beep.
Compact disc player
Push the "RCL" button to change the dis-
play between the track number
elapsed time.
To change what is normally shown on the
display, push this button repeatedly until
you see the display you want, then hold
this button until the display flashes and
you hear a beep.
RDM (Random)
Push the "RDM" button to listen the tracks
on the disc in random order. "RDM" will
appear on the display. To turn off the
random feature, push this button again.
SCAN
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold either side of the "SEEK/
SCAN" button for more than 4 seconds.
"P SCAN" will appear on the display and
you hear two beeps. The radio will tune
in the next preset station up the band,
stay there for 5 seconds, and then move
to the next preset station. To cancel scan
and remain on the current station, push
this button again.
2004 MATRIX from Oct. '03 Prod. (OM12861U)
and
117