Toyota 2004 Matrix Owner's Manual page 141

"PLAYER ERROR": There is trouble in-
side the system. Eject the disc. Set the
disc again.
If malfunction is not rectified, take your
vehicle to your Toyota dealer.
∗
Dolbyr B NR
If you are listening to a tape that was
recorded with Dolbyr B Noise Reduction,
push the " " button. "DOLBY NR ON"
will appear on the display. Push the button
again to turn off Dolbyr B NR. "DOLBY
NR OFF" will appear on the display.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
∗
: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
'04 MATRIX_U (L/O 0307)
EQ (Equalizer)
Your audio system can store five different
EQ settings so that you will not need to
readjust it every time you listen to a dif-
ferent program.
To use a preset setting:
Push the "EQ" button repeatedly until the
EQ number you want to use appears on
the display.
To change a preset EQ setting:
1. Use the "TONE" button and the "TUNE/
SELECT" knob to select the desired
equalization. (For details, see "TONE".)
2. Push and hold the "EQ" button until
"SELECT EQ #" appears on the dis-
play.
3. Push the "EQ" button repeatedly or
turn the "TUNE/SELECT" knob to select
the desired preset EQ number.
4. Push and hold the "EQ" button until
"EQ SAVED" appears on the display
and you hear a beep. This EQ setting
is saved to that number.
HR/MIN (Hours/minutes adjustment)
These buttons are used to adjust the
clock time. (For details, see "Clock" on
page 154 in Section 1−10.)
INFO (Information)
When an RDS radio station transmits a
text message, "INFO" will be displayed. At
this time, push the "INFO" button to view
the text message. If the whole message
does not appear on the display, part of
the message will appear every three sec-
onds until the message is completed. To
scroll through the message at your own
speed, push the "INFO" button consecu-
tively. When the whole message has been
displayed, the message will disappear.
The message display will be canceled if
any button that affects the display is
pushed. To view the message again, push
the "INFO" button again.
The RDS audio system saves a message
until a new message is received.
If the text message is not available when
you push "INFO" button, "NO INFO" will
appear on the display.
2004 MATRIX from Oct. '03 Prod. (OM12861U)
123