Audio System - Honda 1993 Civic Coupe Owner's Manual

Audio System

You can use any of three methods
to find radio stations on the
selected band: TUNE, SEEK, or the
Preset buttons.
The TUNE function lets you find a
desired frequency. Push the
TUNE/SEEK switch up to change to
a higher frequency, and down to
change to a lower frequency.
To change the frequency up or
down a single increment, push and
release the TUNE/SEEK switch.
The SEEK function searches the
band for stations with a strong
signal. Depending on which way
you push the TUNE/SEEK switch,
the system searches up or down
from the current frequency. Push
the switch until you hear a beep,
then release it. The system
searches until it finds a station
with a strong signal, then stops.
If you do not want to listen to that
station, push TUNE/SEEK again.
Comfort and Convenience Features
ON/OFF/VOL
KNOB
SEEK/TUNE BAR
AM/FM
BUTTON
Presetting
The preset buttons allow you to
store radio frequencies for later
selection. Each button will store
one frequency on the AM band,
and two on the FM band. To store
a frequency:
1. Select the desired band, AM
or FM. FM1 and FM2 allow you
to store two frequencies with
each Preset button.
STEREO INDICATOR
PRESET
BUTTONS
2. Use the TUNE or SEEK function
to tune the radio to a desired
station.
3. Pick the Preset button you
want for that station. Press the
button and hold it until you
hear a beep.
4. Repeat steps 1 to 3 to store a
total of six stations on AM and
twelve on FM.