Honda 1993 Civic Coupe Owner's Manual page 171

Fuses
Checking and Replacing
If something electrical in your car
stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on the
fuse box cover or inside the fuse
box which fuse or fuses control
that component. Check those
fuses first, but check all the fuses
before deciding that is not the
cause. Replace any blown fuses
and check the component's
operation.
1. Turn the ignition switch to
LOCK (0). Make sure the
headlights and all other
accessories are off.
2. Remove the cover from the
fuse box.
Taking Care of the Unexpected
BLOWN
3. Check each of the large fuses in
the underhood fuse box by
looking through the top at the
wire inside. Removing these
fuses requires a Phillips
head screwdriver.
FUSE PULLER
4. Check the smaller fuses in the
underhood fuse box and all the
fuses in the interior fuse box
by pulling out each fuse with
the fuse puller provided in the
interior fuse box.