Honda 1993 Civic Coupe Owner's Manual page 141

3. Remove the rubber weather
seal by pulling on the tab.
4. Unclip the end of the
hold-down wire from its slot.
Pivot it out of the way and
remove the bulb.
5. Insert the new bulb into the
hole, making sure the tabs are
in their slots. Pivot the
hold-down wire back in place
and clip the end into the slot.
6. Push the rubber weather seal
over the bulb. Make sure the
tab is on the top.
7. Push the electrical connector
onto the tabs of the new bulb.
Turn on the headlights to test
the new bulb.
8. (Passenger's side)
Reinstall the air intake tube.
Replacing the Front Side
Marker/Turn Signal and
Parking Light Bulb
SCREW
1. Use a Phillips head screw-
®
driver to remove the screw
from the top of the fender.
2. Move the side marker light
assembly forward until it slides
out of the body.
3. Turn the socket one-quarter
turn counterclockwise to
remove it from the lens.
continued
Maintenance
Lights