Honda 1993 Civic Coupe Owner's Manual page 142

Lights
4. Remove the bulb by pushing it
in slightly and turning it
counterclockwise.
5. Install the new bulb in the
socket. Turn it clockwise to
lock it in place.
6. Insert the socket back into the
lens. Turn it clockwise to lock
it in place.
7. Turn on the parking lights to
make sure the new bulb works.
8. To reinstall the light assembly
in the fender, line up the guide
on the assembly with the metal
tab next to the headlight and
line up the fingers on the light
assembly with the holes in the
fender. Push the light assembly
straight back.
9. Install the mounting screw and
tighten it securely.
Maintenance
Replacing Rear Bulbs
(in Fenders)
LOCK TABS
COVER
1. Open the trunk.
2. Remove the cover from the
inside of the taillight assembly
by pushing on the tab.
3. Determine which of the three
bulbs is burned out:
tail/stoplight, turn signal, or
side marker. Remove the
socket for that bulb by turning
it counterclockwise.
4. To remove either the
tail/stoplight bulb or the turn
signal bulb, push it in slightly
and turn it counterclockwise.
To remove the side marker
bulb, pull it straight out of
the socket.
5. Install the new bulb in the
socket. Insert the socket back
in the taillight assembly and
turn it clockwise to lock it
in place.
6. Test the new bulb. Reinstall the
cover over the taillight
assembly.