Subaru 2012 Impreza Owner's Manual page 176

3-62
Instruments and controls
2. After the selection screen is displayed,
operate the " " or " " switch to show the
"Initialize" item. Then, pull the " /SET"
switch toward you.
! Reset to factory default settings
1. Perform the preparation steps accord-
ing to "Preparation for initialization" F3-
61.
2. Operate the " " or "
select the "Reset to Defaults" item, and
then pull the " /SET" switch toward you.
3. The system displays "No" first. To
return to the factory default settings, select
"Yes" by operating the " " switch.
" switch to 4. Confirm the setting by pulling the " /
SET" switch toward you.
5. The system will notify you that the
setting is complete for approximately 3
seconds.