Toyota 2003 Celica Owner's Manual page 62

2. Fix the child restraint system with
the seat belt.
Latch the hook onto the exposed an-
chor bracket and tighten the top
strap.
For instructions to install the child re-
straint system, see "Child restraint" in this
section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
62
'03MY CELICA U (L/O 0208)
Slide the back−plate of the flap under the
carpet to cover the anchor bracket when
it is not in use.
—Installation with child
restraint lower anchorages
Lower anchorages for the child restraint
systems complying with the FMVSS225
specifications are installed in the rear
seat.
The anchorages are installed in the seat
cushion of both rear seats.
Child restraint systems complying with the
FMVSS225 specification can be fixed to
these anchorages. In this case, it is not
necessary to fix the child restraint system
with a seat belt.
2003 CELICA from Aug. '02 Prod. (OM20809U)