Panasonic KX-PX2M Operating Instructions Manual page 7

Home photo printer
Hide thumbs Also See for KX-PX2M:
Table of Contents

Advertisement

WARNING:
• To prevent the risk of fire or electrical
shock, do not expose the product to
rain or any type of moisture.
• Unplug the product from power
outlets if it emits smoke, an abnormal
smell, or makes an unusual noise.
These conditions can cause fire or
electric shock. Confirm that smoke
has stopped emitting and contact the
Panasonic Call Center at 1-800-211-
PANA (1-800-211-7262).
CAUTION:
• The wall outlet shall be installed near
the equipment and easily accessible or
the power plug or an appliance coupler
shall remain readily operable.
• Although the power button is in
the "OFF" position, the unit is not
completely disconnected from the
power supply. Remove the plug from
the wall outlet if you will not be using
the unit for an extended period of
time. Place the unit so the plug can be
easily removed.
• Be sure to remove the memory card
from the unit before disconnecting the
power cord.
• When moving the unit, disconnect the
power cord.
• Do not place heavy object on the unit,
or sit on it.
• Do not use the unit in a location
exposed to sooty or steamy emissions,
dampness or excessive dust.
• Avoid placing the unit in locations
subject to high temperatures. In
particular, avoid placing the unit in
locations subject to direct sunlight or
close to stoves.
• Take care not to catch your fingers in
the opening for the ink cassette and
paper cassette.
• Do not touch the paper during printing.
Paper moves back and forth 4 times
during printing. Do not touch the paper
until the printing process has finished.
• Do not touch the thermal head located
inside the unit as this may lead to burn
injury.
Continued on next page
7

Advertisement

Table of Contents
loading

Table of Contents