Table of Contents
Advertisement
Step 2: Download and update the latest
software version
1
Connect a USB storage device.
2
Press .
3
Select [Setup] > [Update software].
4
Follow the instructions to load a file onto
your USB storage device.
5
Connect the USB storage device to your
computer, then double-click the file.
» A Web page is launched.
6
Follow the instructions in the Web page.
•
If the current software version matches
the latest software update file, you do
not need to update your TV software.
•
If the current software version is
smaller than the latest software update
file, download the latest software
update file to the root directory of
your USB device.
7
Disconnect the USB storage device from
the computer.
Change TV preferences
Use the preferences menu to customize your
TV settings.
1
Press .
2
Select [Setup] >[TV settings] >
[Preferences].
3
Select one of the following, then press OK.
[Menu language]: Select a menu
•
language.
[Sleep timer]: Switch the TV to
•
standby after a pre-defined duration.
•
[Location]: Optimize TV settings for
your location - home or shop.
[E-sticker]: (For shop mode only)
•
Switch the e-sticker on or off.
[Volume bar]: Display the volume bar
•
when you adjust the volume.
•
[Auto switch off]: To conserve energy,
set the TV to switch off automatically
after a period of inactivity.
Downloaded From TV-Manual.com Manuals
•
[Channel information size]: Change
the type of information that is
displayed when you switch channels.
[Universal access]: Enable or disable
•
the universal access menu.
[Key beep]: Enable audio feedback
•
when you press buttons on the
remote control or TV.
•
[Audio out delay]: Automatically sync
the image on your TV to the audio
from a connected Home Theater.
[TV position]: Apply the best settings for
•
your TV based on how it is mounted.
[Clock]: Display or remove the time
•
from the TV, and sets clock options.
4
To exit, press
.
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
While you watch TV, press .
2
Select [Setup] > [Watch demo], OK.
3
Select a demo and press OK to view it.
4
To exit, press
.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press .
2
Select [Setup] > [TV settings] > [Factory
settings], then press OK.
3
If you are prompted to enter a code, enter
the child-lock code (see 'Set or change
code' on page 19).
» A confirmation message is displayed.
4
Press OK to confirm.
EN
23
Advertisement
Table of Contents
