Panasonic CF-W8 Series Reference Manual page 57

WinDVD
<Only for CF-F8/CF-W8 Series>
WinDVD is a software application for DVD playback. For further information, refer to the software's online manual.
DVD-Audio cannot be played back using WinDVD.
Running WinDVD
1
Double-click
Alternatively click [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD for Panasonic].
Use WinDVD as administrator.
If the AutoPlay screen is displayed after a disc is set in the CD/DVD drive, click [Play DVD movie-using InterVideoWinDVD].
To access the online manual
After starting WinDVD, perform either of the following procedures.
Click "?" on the WinDVD control panel.
Right-click on the WinDVD screen and click [Help].
SUPPORT INFORMATION
If WinDVD does not operate properly, we recommend carefully reading the online help file first for problems with the oper-
ating environment or operations.
If you still cannot troubleshoot the problem, enter the required information in the inquiry form on the homepage (http://
www.corel.com/), and submit the form.
CAUTION
Do not start WinDVD while the hard disk drive indicator
While WinDVD is running, do not:
• Enter standby or hibernation.
• Switch the display by pressing Fn + F3.
• Turn off the CD/DVD drive power.
If performing the operations described above, shut down WinDVD, then restart.
During motion video playback, do not:
• Eject the disc.
• Use other applications or the Command Prompt.
• Change the settings of the screen properties.
• Turn off the CD/DVD drive power.
If performing the operations described above, shut down WinDVD, then restart.
Do not install another player software together with WinDVD.
Doing so may interfere with smooth playback. Some DVD-Video discs contain the player software and start installing. In
on the desktop.
is blinking immediately after the computer is turned on.
57