Panasonic CF-W8 Series Reference Manual page 120

Troubleshooting (Advanced)
Problems with Input
Pressing a letter key produces a number
The computer may be in ten-key mode.
If NumLk indicator
Only capital letters are being input
The computer may be in Caps Lock mode.
If Caps Lock indicator
How to input European characters (ß, à, ç etc.), symbols or Euro currency sym-
bol is unclear
With the following procedure, enter a character using the code table.
Click [start] - [All Programs] - [Accessories] - [System Tools] - [Character Map].
A
Point to the desired font name, such as European fonts, and select it.
B
Combined key operations with the Fn key do not work
Check whether [Fn/Ctrl Key] is set to [Replace] in the [Main] menu of the Setup Utility. (
Change the setting back to [Normal], or if continuing with [Replace] selected, use Ctrl in place of Fn.
<Only for CF-T8 Series>
Cannot input by touching the display
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Install the touchscreen driver
again. ( page 14)
Has the touchscreen driver been properly installed?
lights up, press NumLk, to disable the ten-key mode, and then input.
lights up, press Caps Lock, to disable the Caps Lock mode, and then input.
120
page 99).