Panasonic CF-W8 Series Reference Manual page 128

Troubleshooting (Advanced)
Problems with General Network
Unable to connect to a network
Check that the network you are using ([Modem], [LAN], [Wireless LAN], [Wireless WAN] or [Bluetooth]) is set to [Enabled]
in the [Advanced] menu of the Setup Utility (
Restart the computer.
When using the computer as a network computer, some additional settings may have to be made depending on the usage
conditions. We recommend asking your system administrator or the person in charge of the network.
If the hub unit link lump does not light up, one of the following problems may have occurred.
• A problem or failure in the hub unit
• Incorrect cable type or incorrect connection
• A break in the cable
The communications speed is low
Setting [CPU Idle Setting] to [Performance] may improve the communication speed.
See "A device connected to a PC Card does not operate correctly" (
Cannot check the computer's MAC address
Check the computer's MAC address using the following procedure:
Check that the LAN or wireless LAN is not disabled in the Setup Utility or the Device Manager.
A
Click [start] - [All Programs] - [Accessories] - [Command Prompt].
B
Input [ipconfig /all], and press Enter.
C
Wireless LAN's MAC address:
D
Make a note of the 12-digit string of alphanumerics displayed on the wireless LAN's "Physical Address" line.
LAN's MAC address:
Make a note of the 12-digit string of alphanumerics displayed on the LAN's "Physical Address" line.
Enter "exit", and press Enter.
E
page 100).
page
128
127).