Rinnai GRANADA MkII Operating Information And Installation Instructions page 10

1 CUSTOMERS OPERATING INFORMATION
MT0 INCREASE THE HEAT
Press the control buttons in order from front to rear, this will ignite additional burners as shown
in the diagram.
There is no need to hold the buttons for 15 seconds when increasing the heat.
WTO DECREASE THE HEAT
This is simply done by releasing the control buttons in order from rear to front, to the required
setting.
GRADUATE, GALAXIE, GRANADA
Ignition/Low
1 &I
Medium
J, ,
High
g, , ,
TITAN
rsziig )1
Ignition/Low
y, ,
Burner Settings
(MJ/h)
LOW MEDIUM HIGH
Titan 7
Graduate
6
-
12
Natural 15 Propane 14
18
Galaxie
7
14
21
Granada
8 16
25
/ FAN
The fan switch has two speed settings, and an OFF position. This allows you to choose the best
conditions for maximum comfort.
If the fan switch is in the HIGH or LOW position, the fan starts automatically when the heater is
alight. When the heater is turned off, the fan stops automatically, there is no need to return the
manual fan switch to the off position each time the heater is turned off.
( TO TURN THE HEATER 04
Press and release the front button.
Ensure all burners are extinguished.
-9-