Panasonic CF-T1 Series Operating Instructions Manual page 12

First-time Operation
Label on the top surface,
and insert the shutter-
side headfirst.
USB Floppy
Disk Drive
12
<When using a PC Card-compatible CD drive for reinstalling>
8
Create Backup Disks for reinstallation
To create backup disks, the floppy disk drive (optional: CF-VFDU03) and formatted
2HD floppy disks are needed.
Connect the USB floppy disk drive to your computer.
1
NOTE
The floppy disk drive must be the A drive.
Prepare 2HD floppy disks and make sure they are not in the write-protected state,
2
and then set it.
Windows 2000
3
Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the
on-screen instructions.
Windows XP
Select [start] - [All Programs] - [Panasonic] - [Create Backup Disk] and follow the
on-screen instructions.
Place a label identifying the contents on each disk.
4
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create
the disk by following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your com-
puter to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is dis-
played, select [OK] and then contact your technical support office (
While the floppy disk drive indicator is on, do not remove the floppy disk,
power off your computer or use the standby or hibernation function (
"Standby/Hibernation Functions").
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its
original state. In this case, contact your technical support office (
This concludes the first-time use operation guidelines.
page 32).
page 32).