9.Voulume
10.Manual scan radio+
11.Manual scan radio-
12.Wave band switch
13.Return to main menu
14.General setup
15.Status and time display
16. Favorite radios
Automatically scan radio
·Press 1【auto-scan radio】button, the unit will auto-scan radio, and save them
into 1-6 button of each wave band.
●Scan
·
Press 2【browse】button, it auto-scan radio which is per-set in 1-6 button of
each wave band, Every radio is displayed for 10 minutes.
● Loc
· Press 3 【Loc】 button to setup remote or short-range scan radio mode of unit, if
be setup in the short-range scan radio mode, the unit just receive local strong
signal radio. If be setup in remote mode, it will receive local and remote radios.
● Stereo and single track switch:
·Press 4【ST】button to setup stereo and single track receive radio mode.
● RDS(optional function)
·If no RDS, or RDS is closed, 5-7 are Invalid.
A.【PTY】press 7 to choose your favorite programs style, 2 seconds later it will
auto-scan program of the program style you setup.
B.【TA】after you press5, it will to auto-search RDS display radio.
C.【AF】AF function is setup to be open while being again, Press 5 to close or
re-open it,
If the current signal is weak, within 50 seconds the unit will auto-search and
display strong signal radio of same style.
● Manual Scan
·Press 10【
】and 【
】 to choose different radio channels upward and
】and【
】the unit will search the channels
downward. Long press 10【
upward or downward automatically, It stops when a channel is searched.
● Band switch:
·Press 12【Band】to switch the radio band. The switching order is as follows:
FM1→FM2→FM3→AM1→AM2
● Favorite radio channels:
·When the unit receive a favorite channel, You can press one of the buttons in
1-6 keys for 2 seconds to save it in this button. Press 1-6key to play the preset
channel. Show as picture 16.
16
Need help?
Do you have a question about the D711G and is the answer not in the manual?
Questions and answers