Using The Ac Adaptor; Adjusting The Hand Strap - Panasonic AG-AC120EN Operating Instrctions

Using the AC adaptor

Installation
1
Connect the DC cord to the AC adaptor.
2
Plug the AC cord into the power outlet.
3
Insert the DC cord's battery connector until
it clicks into place.

Adjusting the hand strap

Adjust the hand strap to suit your hand.
1
Open the cover and adjust the length of the
strap.
2
Close the cover.
• Make sure that the cover is firmly closed.
Removal
1
Turn the POWER/MODE switch <OFF> (Page 23),
and confirm that the mode lamp is off.
2
Remove the DC cord's battery connector
while pressing the battery release button.
3
Disconnect the AC cord from the power
outlet.
• The battery cannot be recharged when a DC
cord is connected to the AC adaptor.
• Disconnect the AC cord from the power outlet
when this device is not in use.
21