Overheat Protection - Kalorik IKP 40625 Operating Instructions Manual

Fax +1 305 430 9692
Heat-resistant glass, ceramic moulds (casserole dish), copper,
aluminium, pans/pots with a rounded bottom (not flat – e.g. a wok)
or pans/pots with a diameter of less than 12cm (4 ¾").
A magnetic tester is supplied. Please place the tester beforehand on
the external bottom of the utensil (pan or pot) you want to use, to
make sure it is compatible with an induction cooking plate.
CLEANING
Before cleaning, unplug and wait for the appliance to cool
•
down.
Wipe the housing only with a moistened cloth or sponge. Do not
•
clean with any abrasive scouring pad or steel wool, as this will
damage the finish.
The ceramic plate can also be cleaned with a damp cloth or
•
sponge. Use a commercially available special cleansing agent
for ceramic glass hobs and induction cooking plates to remove
stubborn stains or discolorations on the plate, and if necessary
also a stainless steel wool sponge.
Do not immerse in water or any other liquid.
•

OVERHEAT PROTECTION

The induction cooking plate is equipped with an automatic
overheating protection feature.
If your cooking plate overheats and reaches a temperature of over
320F while in "Power" mode (liquids usually stay at a maximum
temperature of 212F), a prolonged beep will sound and error code
E7 will be displayed. If this happens, the plate will not shut off
automatically. After reviewing, if you consider the situation to be
normal, we suggest to first switch the unit off and back on, than
select the "temperature" mode instead of "power" mode, as
"temperature" mode is more adapted to the cooking of solid food,
while the "power" more is more adapted to the heating of liquids (it
works continuously at the set power and does not regulate a
temperature).
In "Temperature" mode, since oil temperature can be much higher
than water temperature, the overheat protection will be triggered at
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
9
Assembly page 9/24
special instruction from Team
Print only
IKP 40625 - 141007