Important Notes; Installing And Connecting The Hob - Figure 1/2/3/4/5; Removing The Hob - Siemens EH6..TM series Instructions For Installation And Use Manual

Table of Contents

Advertisement

Important notes

Safety in use is only guaranteed if the technical installation of
the hob has been carried out correctly and in accordance with
the installation instructions. The installation technician shall be
liable for any damage caused as a result of incorrect
installation.
Only an authorised technician is able to connect the appliance.
The guidelines set out by the local electricity provider must be
observed.
This is a class I appliance and should only be used with an
earthed connection.
Using this appliance without an earth connection or after it has
been incorrectly installed may, under very rare circumstances,
cause serious harm.
The manufacturer accepts no responsibility for any malfunction
or damage caused by incorrect electrical installation.
If the appliance is not fitted with an accessible plug, means for
disconnecting it must be incorporated in the fixed installation, in
accordance with the installation regulations.
The inlet hose must be positioned so that it does not touch any
of the hot parts of the hob or oven.
Induction hobs may only be installed over ovens with the same
brand of forced-air ventilation. Refrigerators, unventilated ovens,
and washing machines may not be installed beneath the hob.
If the hob is installed above a drawer, metal objects stored
inside the drawer could become very hot due to the air
recirculating from the hob ventilation system. If this occurs, an
intermediate support is recommended.
A wooden panel can be used as an intermediate support or
you may order a suitable accessory from our Technical
Assistance Service.
The reference code for this accessory is 680502.
Any change to the appliance's interior, including changing the
power cable, must be performed by the Technical Assistance
Service.
4
Installing and connecting the hob - Figure 1/2/
3/4/5
Voltage, see specifications plate.
Connect using the connection drawing only.

Removing the hob

Disconnect the appliance from the mains.
Remove the hob by pushing it from below.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh6..ta1 series

Table of Contents