Guide To Using This Manual 2 Ordering Spare Parts - Stihl MS 193 Instruction Manual

English
1/4" P chain
Picco Micro 3 (71 PM3) Type 3670
Pitch: 1/4" P (
6.36 mm)
Drive link gauge: 1.1 mm
Chain sprockets
6-tooth for 3/8" P (spur sprocket)
Max. chain velocity to
ISO 11681:
8-tooth for 1/4" (spur sprocket)
Max. chain velocity to
ISO 11681:
As a rule, the mean chain velocity in
operation is about 20% lower than the
maximum chain velocity in accordance
with ISO 11681. Contact your STIHL
servicing dealer for advice on personal
protective equipment.
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
Sound pressure level L to ISO 22868
p
100 dB(A)
Sound power level L to ISO 22868
w
113 dB(A)
44
Vibration measurement a
ISO 22867
MS 193 C with
1/4" chain:
MS 193 C with
3/8" P chain:
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
25.5 m/s
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
23.2 m/s
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
to
Ordering Spare Parts
hv,eq
Handle, Handle,
Please enter your saw model, serial
left right
number as well as the part numbers of
the guide bar and saw chain in the
2 2
3.6 m/s 3.6 m/s
spaces provided. This will make re-
ordering simpler.
2 2
3.6 m/s 3.6 m/s
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
2
Model
Serial number
Guide bar part number
Chain part number
MS 193 C