Applying Eq (Equalizer) To The Input Signal - Yamaha MA2120 Setup Manual

Setup Mode (Advanced settings)

Applying EQ (equalizer) to the Input Signal

A two-band EQ (TREBLE and BASS) can be applied to the input signal to adjust the sound quality.
The EQ range is ±10dB and can be set in intervals of 1dB.
2 3
10
MA2120 Setup Guide
1, 4, 5
1
Press and hold the [SETUP] encoder for at least
one second.
2
Press input level knob 3 (BASS), or input level
knob 4 (TREBLE).
3
Press input level knobs 1 - 8 to select to which
input channel you would like to apply the EQ.
4
Turn the [SETUP] encoder to adjust the level of
EQ.
The parameter value changes with each click of the
encoder.
-10dB:
-9 to -6dB:
-5dB:
-4 to -1dB:
0dB:
+1 to +4dB:
+5dB:
+6 to +9dB:
+10dB:
NOTE
If the set EQ value for [INPUT 7] and [INPUT 8] exceeds
+5dB, the enhancer function starts and harmonic
overtones are added.
5
Press the [SETUP] encoder to apply the setting.
The status is back to the channel select (Step 3).
(Default setting)