Table of Contents
Advertisement
Step 3: Take of the side and front plastic covers. Then put the chair into the fixation and fix
and lock it with the screw and washer from inside the drive unit.
Step 4: Use cable ties to fix the connection cable between from the chair to the drive unit.
Makes sure the seat can freely rotate with the cable getting twisted or squeezed. Before
fixing the cables rotate the seat to the maximum, then fix cables in place and rotate back
and forth to see if the cable moves freely.
Step 5: Now drive the unit down and up to check if the seat passes all steps and if the
clearance is ok.
ALPHA
stairlift
Stairlift ALPHA Installation Manual
Edition March 2014
Washer and
screw
page 6 of 14
Advertisement
Table of Contents
