LG Multi V ARUN053GF2 Installation Manual page 5

oPeratIon
Do not allow water, dirt, or animals to enter the unit.
There is risk of unit failure, fire, electric shock, physical injury or death.
Do not provide power to or operate the unit if it is flooded or
submerged.
There is risk of fire, electric shock, physical injury or death.
use a dedicated power source for this product.
There is risk of fire, electric shock, physical injury or death.
Do not operate the disconnect switch with wet hands.
There is risk of fire, electric shock, physical injury or death.
Periodically verify the equipment mounts have not
deteriorated.
If the base collapses, the unit could fall and cause property damage,
product failure, physical injury or death.
Do not touch the refrigerant piping during or after operation.
It can cause burns or frostbite.
Do not operate the unit with the panel(s) or protective
cover(s) removed; keep fingers and clothing away from
moving parts.
The rotating, hot, cold, and high-voltage parts of the unit can cause
physical injury or death.
If gas leaks out, ventilate the area before operating the unit.
Leaking gas may cause fire, electric shock, explosion, physical injury or
death if the unit is mounted in an enclosed, low-lying, or poorly ventilated
area and the system develops a refrigerant leak.
Clean up the site after installation is finished, and check that no metal scraps, screws, or bits of wiring have been left
inside or surrounding the unit.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
safety InstructIons
to avoid physical injury, use caution when cleaning or
servicing the air conditioner.
Do not turn off the main power switch after operation has
been stopped.
Wait at least five (5) minutes before turning off the main power
switch, otherwise it may result in product malfunction.
Do not use this equipment in mission critical or special-
purpose applications such as preserving foods, works of art,
wine coolers or refrigeration. the equipment is designed to
provide comfort cooling and heating.
Oil, steam, sulfuric smoke, etc., can significantly reduce the performance
of the unit, or damage its parts.
Provide power to the compressor crankcase heaters at least
six (6) hours before operation begins.
Starting operation with a cold compressor sump(s) may result in severe
bearing damage to the compressor(s). Keep the power switch on during
the operational season.
Do not block the inlet or outlet.
Unit may malfunction.
Do not open the inlet grille of the unit during operation. Do
not operate the unit with the panels or guards removed. Do
not insert hands or other objects through the inlet or outlet
with the unit is plugged in. Do not touch the electrostatic
filter, if the unit includes one.
The unit contains sharp, rotating, hot, and high voltage parts that can
cause personal injury and / or electric shock.
5