Konica Minolta bizhub C35 Reference Manual page 343

Item
[Access Permission Address]
8-82
Description
To specify addresses being permitted
access, select [Enable].
Choices: [Enable], [Disable]
Default: [Disable]
Range of IP Specify the starting and ending
address per- addresses of ranges being permitted
mitted access access.
Format: *.*.*.* (The asterisks (*) indicate
numbers between 0 and 255.)
Default: [0.0.0.0]
To specify a single IP address, type
the same IP address into both the
box for the starting IP address and
for the ending IP address, or type
"0.0.0.0" into the box for either the
starting IP address or the ending IP
address.
If the starting IP address is larger
than the ending IP address, the
setting is not applied.
Configuring the Printer