CITROËN C3 Handbok page 130

Driving
Displays in the instrument panel
When you move the selector in the gate to
select a position, the corresponding indicator is
displayed in the instrument panel.
P. Park
R. Reverse
N. neutral
D. Drive (Automatic driving)
S. Sport programme
T. Snow programme
1 2 3 4. Gears engaged during manual
operation
-. Invalid value during manual operation
Foot on brake
F Press the brake pedal when this
indicator lamp is displayed in the
instrument panel (e.g.: starting
the engine).
128
Moving off
F apply the parking brake.
F Select position P or N.
F Start the engine.
If this procedure is not followed, there is an
audible signal, accompanied by the display of
an warning message.
F With the engine running, press the brake
pedal.
F Release the parking brake.
F Select position R, D or M.
F Gradually release the brake pedal.
The vehicle moves off immediately.
If position N is selected inadvertently
while driving, allow the engine to
return to idle then select position D to
accelerate.
If the ambient temperature is
below -23°C, the engine should be left
at idle for four minutes, to ensure the
correct operation and life of the engine
and gearbox.
When the engine is running at idle, with
the brakes released, if position R, D
or M is selected, the vehicle moves
even without the accelerator being
pressed.
When the engine is running, never
leave children in the vehicle without
supervision.
When carrying out maintenance with
the engine running, apply the parking
brake and select position P.