Basic Functions; Cooling Operation - Adjusting The Air Flow (Swing) Direction; Heating Operation; Air Circulation Operation - LG LA240HSV2 Owner's Manual

Cooling Operation
1. On the remote controller, press
indoor unit.
2. Press repeatedly until the cooling symbol (snowflake)
is displayed on the remote controller display screen.
3. Press the up and down arrow buttons
decrease currently displayed temperature.
The temperature range for cooling is: 65 °F (18 °C) - 86 °F (30 °C).

air Circulation Operation

This mode only circulates the indoor air without changing the room
temperature.
The cooling lamp lights up in air circulation mode on the indoor unit.
1. On the remote controller, press
indoor unit.
2. Press to activate the air circulation operation.
will be displayed on the remote controller display screen.
3. Press to adjust the fan speed.

adjusting the fan speed

1. Press repeatedly to adjust the fan speed. See Table 3
below for the various speed adjustments.
2. Select if you want natural air. The fan speed adjusts auto-
matically.
Table 3: Fan Speed Levels
Display Symbol
to turn on the power to the
to increase or
to turn on the power to the
Speed
High
Medium - High
Medium
Medium - Low
Low
Natural Wind
Due to our policy of continuous product innovation, some specifications may change without notification.

basiC funCtiOns

Adjusting the Air Flow (Swing) Direction

Heating Operation

1. On the remote controller, press
indoor unit.
2. Press repeatedly until the heating symbol (sun)
displayed on the remote controller display screen.
3. Press the up and down arrow buttons
to increase or decrease the currently displayed temperature.
• The temperature range for heating is: 61 °F (16 °C) - 86 °F (30 °C).
• Cooling-only models do not support this function.

dehumidifying Operation

This mode removes excess moisture from an environment with high
humidity or during local rainy seasons, in order to prevent mold
from setting in. It adjusts the room temperature and the fan speed
automatically to maintain the optimal level of humidity.
1. On the remote controller, press
indoor unit.
2. Press repeatedly until the dehumidifying symbol (raindrop)
is displayed on the remote controller display screen.
• When indoor unit is in dehumidifying mode, you cannot adjust the
room temperature. Temperature is being adjusted automatically.
• While in dehumidifying mode, display screen will not show the tem-
perature value.
adjusting the air flow (swing)
direction
1. Press repeatedly to adjust vertical air flow and desired
direction.
• Select to adjust the direction of the air flow automatically.
2. Press repeatedly to adjust the horizontal air flow and
desired direction.
• Select to adjust the direction of the air flow automatically.
• Some Single Zone Inverter Wall Mounted models may not support
air flow direction. Check your model to be sure that it is an option.
• Arbitrarily adjusting the air deflector may result in product failure.
• When restarting the air conditioner, it will remember the previously
set direction of air flow. As a result, the air deflector may not ac-
curately reflect the icon displayed on the remote controller. If this
occurs, press or
once more.
Cooling Operation -
to turn on the power to the
is
.
to turn on the power to the
to adjust the direction of the air flow
13