Basic Functions; Cooling Operation - Adjusting The Air Flow (Swing) Direction - LG LS120HEV1 Owner's Manual

Cooling Operation
1. On the remote control, press
2. Press repeatedly until the cooling symbol (snowflake)
is displayed on the remote control display screen.
3. Press the up and down arrow buttons
decrease currently displayed temperature.
The cooling temperature range is 64 °F (18 °C) - 86 °F (30 °C).
Air Circulation Operation
This mode circulates indoor air without changing the room
temperature.
The cooling lamp lights up in air circulation mode on the indoor unit.
1. On the remote control, press
2. Press to activate air circulation operation. The fan symbol
will be displayed on the remote controller display screen.
3. Press to adjust the fan speed.
Adjusting the Fan Speed
1. Press repeatedly to adjust the fan speed. See Table 4 for
the various speed adjustments.
2. Select for natural air. The fan speed adjusts
automatically.
Table 4: Fan Speed Levels
Display Symbol
Heating Operation
1. On the remote control, press
2. Press repeatedly until the heating symbol (sun)
displayed on the remote control display screen.
3. Press the up and down arrow buttons
decrease currently displayed temperature.
• The cooling temperature range is 60.8 ° F (16 ° C) - 86 ° F (30 ° C).
• Cooling only models do not support this function.

Cooling Operation - Adjusting the Air Flow (Swing) Direction

to turn on the indoor unit.
to increase or
to turn on the indoor unit.
Speed
High
Medium
Low
Natural Wind
to turn on the indoor unit.
is
to increase or
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.

BASIC FUNCTIONS

Dehumidifying Operation
In order to prevent mold, this mode removes excess moisture from
an environment with high humidity or during local rainy seasons.
This mode adjusts the room temperature and the fan speed auto-
matically to maintain the optimal level of humidity.
1. On the remote control, press
2. Press repeatedly until the dehumidifying symbol (raindrop)
is displayed on the remote control display screen.
• When the indoor unit is in dehumidifying mode, you cannot
adjust the room temperature. The temperature is being adjusted
automatically.
• While in dehumidifying mode, the display screen will not show the
room temperature.
Adjusting the Air Flow (Swing)
Direction
1. To adjust the direction of the air flow vertically, press
repeatedly and select the desired position.
2. Select on the remote control display screen to adjust the
desired vertical position automatically.
3. To adjust the horizontally air flow direction, press
and select the desired position.
4. Select on the remote control display screen to adjust the
desired horizontal position automatically.
• Some models may not support adjusting air flow direction.
Check your model to be sure it is an option.
• When restarting the air conditioner, it will remember the
previously set air flow direction. As a result, the air deflector
may not accurately reflect the icon displayed on the remote
control. If this occurs, press
of the air flow again.
Using 1 Touch Soft Air to deflect air
(Comfort Vane Operation)
The comfort vane operation sets the vane to a preset position. This
deflects the supply air away from blowing directly onto the room
occupants.
1. Press to turn on the indoor unit.
2. Press repeatedly and select the desired direction.
Either or appears on the display screen.
to turn on the indoor unit.
repeatedly
or to adjust the direction
13