Starting A Programme - Electrolux EWW 1486 HDW User Manual

• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.5 Activating the appliance
Press the button to activate or
deactivate the appliance. A tune sounds
when the appliance is activated.
10.6 Setting a programme
1. Turn the programme knob and set the
programme:
• The related programme indicator
comes on.
• The indicator of the
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
programme phases.
2. If necessary, change the temperature,
the spin speed, the cycle duration or
add available options. When you
activate an option, the indicator of the
set option comes on.
If you set something
incorrect, the display shows
the message

10.7 Starting a programme

without the delay start
Press .
• The indicator of
and stays on.
• The indicator
the display.
• The programme starts, the door
locks, the display shows the
indicator
• The drain pump can operate for a
short time when the appliance fills
water.
flashes.
.
stops to flash
starts to flash on
.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.8 Starting a programme with
the delay start
1. Press again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press :
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
• Press
appliance to pause.
• Press
display shows
• Press
start the programme
immediately.
ENGLISH 17
. To
to set the
until the
'.
again to