Hints And Tips - Electrolux EWW 1486 HDW User Manual

Hide thumbs Also See for EWW 1486 HDW:
Table of Contents

Advertisement

12.3 Washing & Timed Drying
To have a good drying the appliance does
not let you set a too low spin speed for
the items to be washed and dried.
1. Press
The display shows 10 minutes.
The indicator
The display shows the set drying value
time. for example:
seconds the display shows the final time
value
the washing and drying cycles (washing +
drying + anti-crease + cooling phases).
If you set only 10 minutes of
drying after washing, the
appliance calculates also the
duration of the anti-crease
and the cooling phases.
2. Press
In the display the indicator
The door is locked. The display shows
regularly a new time value.
12.4 End of the programme
The appliance stops automatically. The
acoustic signals operate (if they are
active).
For more information see 'At the end of
the drying programme " of the previous
chapter.
1. Remove the laundry from the
appliance.
Make sure that the drum is empty.
2. Keep the door ajar, to prevent mildew
and odours.

13. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
13.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are
on the laundry care labels.
• Do not wash together white and
coloured items.
to set the drying time value.
comes on in the display.
. After some
, that is the total duration of
to start the programme.
12.5 Fluff in the fabrics
During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.
The released fluff could stick to the fabrics
during the next cycle.
This inconvenient increases with technical
fabrics.
To prevent the fluff in your laundry, we
recommend that you:
• To do not wash dark fabrics after you
washed and dried light coloured fabrics
(new sponge, wool, sweatshirt ) and
the contrary.
• To dry this type of fabrics at open air
when they are washed the first time.
• To clean the drain filter.
• After the drying phase, clean the empty
drum, the gasket and the door with a
wet cloth.
comes on.
12.6 How to remove the fluff in
the garments
To remove the fluff inside the drum, set a
special programme:
1. Empty the drum.
2. Clean the drum, the gasket and the
door with a wet cloth.
3. Set the rinse programme.
4. Press at the same time
activate the cleaning function until the
display shows CLE.
5. Press
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool and items with painted
illustrations.
• Remove hard stains.
ENGLISH
and
to start the programme.
21
to

Advertisement

Table of Contents
loading

Table of Contents