Table of Contents
Advertisement
8.2 Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
• To activate/deactivate this option
press
the indicator
8.3 Acoustic signals
The acoustic signals operate when:
9. BEFORE FIRST USE
1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in the
compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.
10. DAILY USE - WASHING ONLY
10.1 Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
4. Close the door.
CAUTION!
and
at the same time until
comes on/goes off.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press
and
for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
This removes all possible dirt from the
drum and the tub.
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
10.2 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Carefully close the detergent drawer
ENGLISH
15
at the same time
Hide quick links:
Advertisement
Table of Contents
