Typical Location; Dimensions And Clearances - GE JP200 Owner's Manual And Installation Instructions

Typical installation location.
Read these instructions completely and carefully.

Dimensions and Clearances

13"
(33 cm)
Max.
J
1-3/4"
(4.45 cm)
Min. clearance
to side wall
This counter unit must be installed with
the control knobs toward the front edge
or the side.
Counter space must be provided for installation of the counter
unit. When choosing a location, consider the following:
■ The cooktop should be easy to reach and lighted with natural
light during the day.
■ To eliminate the risk of burns or fire by reaching over heated
surface units, cabinet storage space located above the
surface units should be avoided. If cabinet storage space is
to be provided, the risk can be reduced by installing a range
hood that projects horizontally a minimum of 5" beyond the
bottom of the cabinets. Cabinets installed above the counter
unit may be no deeper than 13" and must be at least
30" above the cooktop.
■ To insure accuracy, it is best to make a template when cutting
the opening in the counter. See the illustration and chart
above for all necessary dimensions.
30"
(76.2 cm) Min.
H
B
A
C
D
F
G
E
Unit and cutout dimensions
A: 21-1/2" B: 16-5/8" C: 19-15/16" D: 15-15/16" E: 16-1/8"
54.61 cm 42.24 cm 50.64 cm
F: 20-1/8" G: 10-1/16" H: 3"
51.13 cm 25.57 cm 7.62 cm
1-3/4" (4.45 cm)
Min. clearance
to side wall
K
The following minimum clearances must be maintained:
■ 2-3/4" (6.98 cm) minimum clearance between the front edge
of the counter unit and the front edge of the counter.
■ 30" (76.2 cm) minimum vertical clearance from the cooktop
to the nearest overhead surface.
■ 15" (38.1 cm) minimum vertical clearance to adjacent
cabinets.
■ 1-1/2" (3.81 cm) minimum vertical clearance between the
bottom of the cooktop and any combustible material, i.e.
shelving.
GEAppliances.com
40.48 cm 40.92 cm
J: 2" Min. K: 2 -3/4" Min.
5.08 cm 6.98 cm
11