Page 1
INSTALLATION AND OPERATING GUIDE Model 802 Electric Heater This guide is intended to help you install and care for your Wickes electric heater. Please read carefully before installing and using your heater. Important Please keep your Guide in a safe place for future...
CUSTOMER CARE All our heaters are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new heater, by providing simple and informative instructions to enable you to install it and to ensure that you benefit from the excellent performance and features it has to offer.
INSTALLATION Location This heater is intended for use in a fireplace opening generally conforming to British Standard 1251 for a nominal 400mm (16 inch) or 450mm (18 inch) Fireplace. It may also be located in other fireplace openings or in a wooden surround, where the following dimensions are available.
Appliance Fixing Method A – Screw Fix There are two slots in the top flange – See figure 2. Mark the fixing position through the slots. Remove the heater. Drill a hole with a No.12 drill bit at each marked position. Insert the wall plugs provided.
Wickes Helpline If you require any further assistance please call the Wickes Helpline on 0161 366 4224 To help us quickly help you, please try to have the following information available before you contact us. •...