Wiring Detectors (Optional) - Bosch FRP-OW3000 User Manual

FERION 3000 OW
5.5

Wiring detectors (optional)

Notice!
The cable for wiring the detectors must not touch the antenna.
If desired, you may wire up to 5 detectors with a two-core cable.
For each detector to be connected perform the following steps,
observing the polarity shown in the graphic.
1.
2.
Bosch Sicherheitssysteme GmbH
–
Guide the cable through the opening of the base and
secure the cable with cable ties. Leave enough cable length
to perform a battery change later.
Strip the wire ends for about 6 mm.
–
2014.09 | 4.3 | F.01U.249.486
Notices | en
31
–