Event Setting - VENTRA VDR-700 User Manual

Table of Contents

8.6.2 Event setting

- Emergency Overwrite: Disables overwrite of previously recorded

Event Button) when storage capacity is full

) when storage capacity is full

Recommend: NOT USE

- G-Sensor Sensitivity: Adjust the sensitivity of the G Sensor to detec

Sensor values (i.e. 2.0G) represents increased sensitivity than higher G Sensor values (i.e. 3.5G)

Sensor values (i.e. 2.0G) represents incr

Suggested value is minimum 2.0G to minimize false triggers

- Driving Speed Limit: Enable / Disable maximum vehicle speed limit

: Enable / Disable maximum vehicle speed limit EVENT trigger. Enter max speed

- Sudden Accel.: To monitor Sudden Acceleration f

To monitor Sudden Acceleration for fleet safety and efficiency. Enter speed based on

desired value. System calculates variation at 0.5 second interval

desired value. System calculates variation at 0.5 second intervals

Suggested value is minimum 10 miles to avoid excessive false triggers.

Suggested value is minimum 10 miles to avoid excessive false triggers

- Sudden Brake: To monitor Sudden Braking for fleet safety and efficiency. Enter speed based on desired

To monitor Sudden Braking for fleet safety and efficiency. Enter speed based on desired

value. System calculates variation at 0.5 second intervals.

System calculates variation at 0.5 second intervals.

Suggested value is minimum 10 miles to avoid excessive false triggers

is minimum 10 miles to avoid excessive false triggers

USER GUIDE V1.0.0

Disables overwrite of previously recorded Emergency Events (Foot Pedal

Adjust the sensitivity of the G Sensor to detect vehicle vibration and shock.

Emergency Events (Foot Pedal Emergency

t vehicle vibration and shock. Lower G

Sensor values (i.e. 3.5G)

EVENT trigger. Enter max speed

Enter speed based on

Table of Contents