Vehicle Fuse Connection For Permanent Power - VENTRA VDR-700 User Manual

Table of Contents

4.2 Vehicle FUSE connection

.2 Vehicle FUSE connection for power supply

VDR requires 2 wires - Red (Positive) and Black (Negative / Ground)

power cable included with the system.

CAUTION

Installation by a Professional technician is highly recommended

nstallation by a Professional technician is highly recommended

Please exercise caution when connecting the power to prevent shock. Do not use sharp object to force cable

Vehicle battery will be drained if unoperated for an extended period of time depending on the size of the

Vehicle battery will be drained if unoperated for an extended

battery. Please disconnect the power plug from the VDR if vehicle will be parked for longer than 1 week

Open the fuse box to identify power terminal for constant power source such as trunk, head lamps,

In-Cabin lights, etc., Fuse information are typically listed in the vehicle's owner manual and or the

Cabin lights, etc., Fuse information are typically listed in the vehicle's owner manual and or the

back of the fuse cover  

* Fuse box location may vary dependent upon vehicle type

Connect Positive terminal cable

color) to Ignition or Acc. Fuse

USER GUIDE V1.0.0

Red (Positive) and Black (Negative / Ground) for installation. Use the

dependent upon vehicle type

terminal cable (RED

for installation. Use the

period of time depending on the size of the

Connect Minus terminal (BLACK color)

to bolt or metal frame of vehicle

bolt or metal frame of vehicle

Table of Contents