Record Setting - VENTRA VDR-700 User Manual

Table of Contents

Advertisement

8.6.1 Record setting

-
3 Channel Mode: Enable only when an optional 3
Enable only when an optional 3
-
Recording FPS: This Frames Per Second (FPS) value appli
The lower frame value, the longer the recording time
-
Sleep Mode: Motion Detection
Motion Detection Mode while vehicle is parked. System automatically records
motion is detected
-
Audio Record Enable: Enable / Disable
-
Front Camera Flip: Inverting of camera angle
-
In-Cabin Camera Flip: Inverting of camera angle
-
Rear Camera Reverse: Reverse
-
Load From Video: Import previou
Import previous setting value from video file
-
Load: Import previous setting value from 'setup.cfg' file
-
Save: Save settings
-
-
SD Format: Format SD card in FAT32 format
Format SD card in FAT32 format - support up to 32GB. If SD card capacity is greater
than 32GB, please use separate format program available
ase use separate format program available on www.ventrainc.com
CAUTION: Formatting the SD card will erase all content. Please back up data if necessary
CAUTION: Formatting the SD card will erase all content. Please back up data if necessary
CAUTION: Formatting the SD card will erase all content. Please back up data if necessary
-
Default: Restore factory default settings
-
Close: Exit setting menu
To save and exit, click on SAVE
USER GUIDE V1.0.0
USER GUIDE V1.0.0
USER GUIDE V1.0.0
Per Second (FPS) value applies to both front view cameras
the longer the recording time capacity on the memory card
Enable / Disable Microphone for audio recording
Inverting of camera angle
Inverting of camera angle
Reverse camera angle
ing value from 'setup.cfg' file
default settings
(Note: NO settings are saved when e
Note: NO settings are saved when exiting via
SAVE button
rd
camera in connected
es to both front view cameras
capacity on the memory card
System automatically records when
support up to 32GB. If SD card capacity is greater
CLOSE)
44

Advertisement

Table of Contents
loading

Table of Contents