Marantz ST-15S1 User Manual page 20

Table of Contents

Advertisement

OPERATION
7 Switching the DAB information
display
1.
Follow steps 1 to 4 under "Tuning in DAB (Digital Audio
Broadcasting) broadcasts" (
DAB station.
2.
Press the DISPLAY button q to switch the DAB
reception information.
• The display switches as shown below each time the
DISPLAY button q is pressed.
q DLS (Dynamic Label Segment) :
The text data included in the broadcast scrolls.
w Ensemble Name :
The ensemble name is displayed.
e PTY (Program Type) :
The category of the broadcast being received is
displayed.
r Channel and Frequency :
The frequency is displayed.
t Audio Information :
The bit rate and mode of the broadcast being
received is displayed.
y Time and Date :
The current time and date are displayed.
u Bit Error Rate :
Noise may be generated and reception quality may
become poor at bit error rates above 0.05. If a rate
above 0.05 is displayed, move the antenna in
different directions to find a position where the rate
displayed is less than 0.05.
page 14) to tune in a
7 DRC (Dynamic Range Control)
• The DRC (Dynamic Range Control) function lets you
change the dynamic range of the received sound
depending on the content of the broadcast so that the
sound is easier to hear even when the volume is low.
1.
Press the MENU button !4 to select menu.
2.
Turn the GYRO TUNING dial !1 to display the DRC
value mode selection screen.
3.
Press the ENTER button !3 to set the DRC value mode.
4.
Turn the GYRO TUNING dial !1 to choose the "DRC
ON" or "DRC OFF".
DRC OFF:DRC is switched off.
Any DRC level broadcast will be ignored.
This is the default setting.
DRC ON: Applies DRC level as sent with the broadcast.
5.
Press the ENTER button !3 to set DRC function.
• This is effective when in a noisy environment and in
quiet sections of broadcast programs.
The broadcast's DRC level is set at the broadcast station.
The DRC can be changed to achieve the optimum level.
DAB/FM/AM TUNER ST-15S1
DAB/FM/AM TUNER ST-15S1
DISPLAY
DISPLAY
TUNED
TUNED
STEREO
STEREO
RDS
RDS
BAND
BAND
SELECT
SELECT
SECONDARY
SECONDARY
DOWN
DOWN
AUTO
AUTO
TUNE
TUNE
q
MENU
MENU
ENTER
ENTER
TUNING/PRESET
TUNING/PRESET
UP
UP
POWER ON/OFF
POWER ON/OFF
MEMO
MEMO
!1
!3
17

Advertisement

Table of Contents
loading

Table of Contents