Panasonic PT-RZ670 series Command Manual page 199

Unused
95
Unused
94
93 Unexpected LD2 OFF
92 Unexpected LD1 OFF
91 Unused
90 LD2 Open failure (unrecoverable)
LD1 Open failure (unrecoverable)
89
LD2 driver communication error
88
LD1 driver communication error
87
86 Lens mounter error
Unused
85
84 Unused
83 Unused
82 FPGA configuration error
FPGA 2 configuration error
81
FPGA 1 configuration error
80
Unused
79
Unused
78
LD2 module high temperature warning
77
LD1 module high temperature warning
76
75 Unused
74 Unused
73 LD1 air thermo sensor disconnected
72 LD2 air thermo sensor disconnected
Unused
71
Unused
70
LD2 module high temperature error
69
68 LD1 module high temperature error
67 Unused
Unused
66
Unused
65
Unused
64
Unused
63
FAN(Pump2) error/warning
62
61 FAN(Pump1) error/warning
60 Unused
59 Unused
58 Unused
Unused
57
Unused
56
Unused
55
Unused
54
Unused
53
52 FAN11(Intake1) error/warning
51 FAN10(Intake2) error/warning
50 FAN9 (Exhaust2) error/warning
FAN8 (Exhaust1) error/warning
49
FAN7 (DMD) error/warning
48
FAN6 (P-Exhaust) error/warning
47
FAN5 (Driver) error/warning
46
FAN4 (Power) error/warning
45
44 FAN3 (PW2) error/warning
43 FAN2 (PW1) error/warning
42 FAN1 (Intake3) error/warning
Unused
41
Unused
40
LD2 failed to light
39
LD1 failed to light
38
Battery replacement for the internal clock
37
Unused
36
LD2 lighting failure
LD1 lighting failure
LD2 lighting failure
LD1 lighting failure
LD2 driver communication error.
LD1 driver communication error.
Stepping-motor is failure.
Limit position detection sensor is failure.
Signal circuit failure.
Environment temperature is too high
Radiator clogging
Liquid cooling unit is failure
High altitude mode is mis select
LD1 air thermosensor has breaking of wire, or connector(DR6) is disconnected.
LD2 air thermosensor has breaking of wire, or connector(RT12/RT1) is disconnected.
Environment temperature is too high
Radiator clogging
Liquid cooling unit is failure
High altitude mode is mis select
Pump,Pump Fan or drive circuit is failure.
Fan replacement time.
Fan or fan drive circuit is failure.
Fan replacement time.
LD2 lighting failure
LD1 lighting failure
Remaining battery level is low.
Unused
199/200