Using The Din Opening Trim Bezel; Preferred Location - Audiovox CommanderMT 128-7902A Installation Manual

14
The CommanderMT Display Controller can be installed using
the DIN opening trim bezel or a snap-on mounting plate as
shown below. The trim bezel permits in-dash or center console
mounting, while the mounting plate can be used with optional
custom brackets, such as swivel or vent mounts.
a.

Using the DIN Opening Trim Bezel

Preferred location

Your CommanderMT Receiver Kit includes a DIN opening trim
bezel for mounting the display controller into an existing dash-
board or console opening.
Using the DIN Opening
Trim Bezel