GMC 2017 Canyon Owner's Manual page 295

294 Vehicle Care
3. Disconnect the outlet duct by
loosening the air duct
clamp (3).
4. Lift the filter cover housing
away from the engine air
cleaner/filter housing.
5. Pull out the filter.
6. Inspect or replace the engine
air cleaner/filter.
7. Reverse Steps 2 5 to reinstall
the filter cover housing.
3.6L V6 Engine
1. Screws
2. Electrical Connector
3. Air Duct Clamp
To inspect or replace the engine air
cleaner/filter:
1. Remove the screws (1) on top
of the engine air cleaner/filter
housing.
2. Disconnect the electrical
connector (2).
3. Disconnect the outlet duct by
loosening the air duct
clamp (3).
4. Lift the filter cover housing
away from the engine air
cleaner/filter housing.
5. Pull out the filter.
6. Inspect or replace the engine
air cleaner/filter.
7. Reverse Steps 2 5 to reinstall
the filter cover housing.
Warning
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
(Continued)
Warning (Continued)
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.
Caution
If the air cleaner/filter is off, dirt
can easily get into the engine,
which could damage it. Always
have the air cleaner/filter in place
when you are driving.